N12 Turbo Forums

Come on fellas, some one must of had the same problem......

HELP PLEASE!!!!

Hey has any one ever changed the seal in the gear box for the gear selector shaft?

Cheers mate, but i would not know how to convert the maps into the wolf handcontroler it all different... thanks but

Hey can a wolf3d computer loose its setting if left unpowered for like a year, having trouble with rough idle and stuttering during free rev, lots of smoke smells like fuel only, can any one help me with some settings..

OK,, the wire was never hooked up but, now ive got drama wid no spark and the way the dissy is hooked up i dont know if its right, but it was running....?

What do you mean pull in wire??

Is it a power or earth for the starter motor. what does it do, was never hooked up but now im burning out earths, one in the back of the dash and one at the plug of computer (wolf3D) for the distributer??

Does anyone now what the black with yellow striped wire does that runs in the loom to the alternater??

Yeh i did mine not long ago i had to juck up the right front, remove the wheel than unbolt the alternator from the mounting bracket, than take off the mount and it should come out. Its a pain in the ass but it works...

Does any one know what are the main wires for power into a wolf computer..

Cheers found the problem its the waste gate flap on the inner housing of the turbo. Pulled out the die grinder and shaved down the ridge under the waste gate hole. Brand new!

Just bought a ET for $500 with T28 turbo, Wolf 3D, front mount, non standard inlet manifold? Has a minour vacum leak but not enough to stop boost, ive tryed takeing the acuator hose of to get unlimited boost but only hit 1.2psi. could the computer be out of tune stoping the car from hitting boost? c...

what prices would i be looking at to install a after market computer for second and new, would only need one for timing or fuel and timing, i can get hold of an et turbo for $800 with an after market computer, Wolf 3D, would it be worth buying just for the computer, is it hard to transfer from one c...

Hi, having some trouble with my 85 exa, Mods: stage three cam, double valve springs and garret GT25 turbo. after having the cam istalled the engine would break up at about 3000 rpm. after finding out the air flow meter needed an ajustment to compensate for the cam, done. after that ive han nothing b...

Hi all, does any one know if there is an adjustment for the thermo fans on a 85 EXA, mine are starting to come on too late??