N12Turbo.com lanyards are now available! Click here to visit the shop

Search found 16 matches

by stlth15
Tue Nov 11, 2014 6:41 am
Forum: General Tech & Modifications
Topic: Knocking noise from CV??
Replies: 2
Views: 6724

Checked that, definately not. The play is between the 2 boots

Can anyone confirm with me, their Drivers side CV doesn't have that much play?

Cheers
by stlth15
Mon Nov 10, 2014 9:43 pm
Forum: General Tech & Modifications
Topic: Knocking noise from CV??
Replies: 2
Views: 6724

Knocking noise from CV??

Hi all. I have a knock when I brake or accelerate on the drivers side. I've checked all engine mounts and stabiliser and steering clamps. I recently replaced my from struts as well. The last thing I checked was the CV. I noticed Thees a fair bit of play side to side as you can see in this video. Is ...
by stlth15
Sat Oct 18, 2014 7:42 am
Forum: General Tech & Modifications
Topic: Indicators don't flash anymore?
Replies: 1
Views: 4741

Indicators don't flash anymore?

Hi guys,

For some reason my indicators no longer flash. They stay permanently on when I indicate. Same with hazard. They don't flash??? I quickly checked to see if there were any blown bulbs but all look ok. Anybody have any ideas?

Thanks
by stlth15
Wed May 21, 2014 1:34 pm
Forum: General Tech & Modifications
Topic: Can I remove bottom front windscreen rubber strip easily?
Replies: 1
Views: 4925

Can I remove bottom front windscreen rubber strip easily?

Hi guys want to know of this can be easily done without ruining the rubber strip. Need to remove it to get to the panel where my wipers are to remove sum rust. Can I just pull it out and put it back in place with silicone afterwards?

Cheers
by stlth15
Sun Dec 22, 2013 8:06 pm
Forum: General Tech & Modifications
Topic: High idle after installing idle control valve!!
Replies: 11
Views: 5487

Yeah which comes back to my original issue of high idle :). I think my only way getting round this issue is move the afm between air filter and turbo. Then plumb the rocker cover breather hose after the afm and before the turbo. Just hope I haven't blown the sump or rocker cover gaskets!!! Cheers gu...
by stlth15
Sun Dec 22, 2013 9:18 am
Forum: General Tech & Modifications
Topic: High idle after installing idle control valve!!
Replies: 11
Views: 5487

Ahh cheers :)
by stlth15
Sun Dec 22, 2013 6:07 am
Forum: General Tech & Modifications
Topic: High idle after installing idle control valve!!
Replies: 11
Views: 5487

Thanks Damo, makes sense, what you say. Can you or someone explain to me the theory for the 2 breather lines, from the rocker cover. Is the drivers side breather an inlet and the passenger side with PCV valve the outlet?

Cheers for the pressure plumbing lesson ;)
by stlth15
Sat Dec 21, 2013 8:06 pm
Forum: General Tech & Modifications
Topic: High idle after installing idle control valve!!
Replies: 11
Views: 5487

Sorry for the dodgy youtube video https://www.youtube.com/watch?v=xtOPJPxlA7Y Hope it makes sense. So my question is, can I stick a second PCV valve between the Rocker cover (drivers side) and the intake into the throttle body. This is what I'm hoping will stop the boost pressure forcing oil out of ...
by stlth15
Sat Dec 21, 2013 7:32 am
Forum: General Tech & Modifications
Topic: High idle after installing idle control valve!!
Replies: 11
Views: 5487

Thanks Damo. I sorted the issue thinking about the comments I've read about the AFM relocation. The breather hose from the Rocker cover had not been tapped in after the the AFM relocation. It was still before the turbo and AFM! This has now lead to a very bad mistake on my part. :evil: The breather ...
by stlth15
Fri Dec 20, 2013 6:58 am
Forum: General Tech & Modifications
Topic: High idle after installing idle control valve!!
Replies: 11
Views: 5487

High idle after installing idle control valve!!

Hi guys, well I managed to track down an idle control valve after getting jack of no cold idle. I cut down the log and sealed both ends with plumbing caps, the air regulator and ICV are installed. All original electrical connections reconnected to air regulator and ICV. The plumb back hose, back to ...
by stlth15
Sat Dec 07, 2013 6:54 am
Forum: General Tech & Modifications
Topic: Fuel filter part number
Replies: 8
Views: 3669

Thanks guys got it
by stlth15
Fri Dec 06, 2013 10:05 pm
Forum: General Tech & Modifications
Topic: Low fuel light does not work
Replies: 1
Views: 1597

Low fuel light does not work

Hey guys just realized the other day my low fuel light does not come on. I ran out of petrol the other day cursing. The gauge appears to be ok but no fuel light. Any ideas where to start to find the problem. Possibly a blown bulb or a switch some where in the fuel tank?? Appreciate any advice. Cheers
by stlth15
Wed Dec 04, 2013 8:53 am
Forum: General Tech & Modifications
Topic: Fuel filter part number
Replies: 8
Views: 3669

I'm after the fuel filter not pump :). Fuel filters are less than $20
by stlth15
Wed Dec 04, 2013 6:39 am
Forum: General Tech & Modifications
Topic: Fuel filter part number
Replies: 8
Views: 3669

Fuel filter part number

Can anyone tell me the part number for our fuel filter. Repco have given me one for the stock n12 and can't find the correct one for the e15et. Oil filter is z145a.

Thanks
by stlth15
Tue Jun 04, 2013 12:58 pm
Forum: General Tech & Modifications
Topic: VL throttle body TPS
Replies: 2
Views: 3141

VL throttle body TPS

Hi guys quick question. When I install the the VL throttle body, do I use the old TPS or the VL one? The VL plug has 3 wires and is different to the standard ET TPS which has has 2 wires??

Cheers