N12Turbo.com lanyards are now available! Click here to visit the shop

Search found 268 matches

by zoomzoom
Mon Mar 30, 2015 9:02 pm
Forum: General Tech & Modifications
Topic: et disc conversion question
Replies: 5
Views: 9767

EA-73-XA wrote:I know im digging up the past

but is that a good way to sort out bias?

go back a few years on this site and you should find the answer to that

i remember afew years back reading threads by a few of the guy on here that race ets were working on bias worth a look
by zoomzoom
Mon Mar 30, 2015 8:46 pm
Forum: General Tech & Modifications
Topic: 15" x 6.5 wheels +45 offset
Replies: 5
Views: 8288

off set

+45 is fine you just have to use 8mm spacers on the back so the wheels don't rub you'll also need longer wheel studs,stock ones are to short
by zoomzoom
Sun Nov 24, 2013 1:49 pm
Forum: General Tech & Modifications
Topic: s-cargo removing flywheel pulley?
Replies: 13
Views: 5452

By rights it should tighten up to on its own
When I did mine I was told too tight it up as much as I could and it would do the rest it self when the engine starts
Its the way I did it , it ain't come off

Zoomzoom
by zoomzoom
Sun Nov 10, 2013 11:15 am
Forum: General Tech & Modifications
Topic: Having trouble starting
Replies: 7
Views: 4560

It was 10yrs dry, cranked ones, than nothing Its seesed would be my first thought Pouring oil into the plug holes? As for a stuck valve, you would hear it hit or brake off the stem and keep turning over. Have you tried turning it over by hand? Should of be the first thing you did before cranking it ...
by zoomzoom
Tue Jul 30, 2013 10:10 pm
Forum: General Tech & Modifications
Topic: Fitting radiator and turbo
Replies: 4
Views: 2915

bit like a Lipton's tea bag mate,gotta jiggle it

with the turbo on
try putting the bottom left corner in first it give you a bit more room to move

mine goes in and out on about 45 from the passenger side

it a bitch but it works



zoomzoom
by zoomzoom
Mon Jul 29, 2013 9:41 am
Forum: General Tech & Modifications
Topic: standard ,20 thou or 40 thou ? will it make a big difference
Replies: 10
Views: 8237

So English Professor,what's wrong with what I wrote? other than the grammar Is it spelt in correctly? Is what I said in anyway wrong? Being so smart yourself wouldn't putting correct grammar to any written words you read come naturally? Back to the question in the thread, Does the gaskets have any w...
by zoomzoom
Mon Jul 22, 2013 7:55 pm
Forum: General Tech & Modifications
Topic: standard ,20 thou or 40 thou ? will it make a big difference
Replies: 10
Views: 8237

not the head it ally only do this to the block,you go draw filing the head you'll take to much off,you only got about a mm to play with for memory 119.2mm minimum thickness, use a straight edge and torte I said to see if the head straight

to be able to read properly is a wonderful thing
by zoomzoom
Sat Jul 20, 2013 1:04 pm
Forum: General Tech & Modifications
Topic: standard ,20 thou or 40 thou ? will it make a big difference
Replies: 10
Views: 8237

i got 40th turbo piston as for power diffrents you would think so being of higher raito.i run 10 psi boost all day no probs till i over heated it blow between 1/2 as for the prob you having with head gaskets blowing. draw file the block east west {and not with some rusting bit of shit that looked li...
by zoomzoom
Wed Jun 19, 2013 9:33 pm
Forum: General Tech & Modifications
Topic: Will n12 turbo instrument cluster fit non-turbo?
Replies: 12
Views: 5754

upull elizabeth had about a dozen of them 12 months ago n/a n12's that is









zoomzoom
by zoomzoom
Sun May 05, 2013 11:50 am
Forum: General Tech & Modifications
Topic: ET to EXA brake conversion
Replies: 9
Views: 4968

the et brake hoses are to short so use your exa ones and while your at it swap the swing arms out the et ones have swing arm brackets where the exa don't
the exa handles heaps better with the sway bar than without
6 bolt,bleed your brake and off you go again



zoomzoom
by zoomzoom
Tue Apr 30, 2013 3:50 am
Forum: General Tech & Modifications
Topic: Clutch Recommendations
Replies: 9
Views: 4120

350 wont get you a looking if you wanting to do ring gear flywheel and hd clutch I got a 4 puck extreme in mine price I doof it I don't know cause it came with other parts when i was looking around the best i fond was $330 for an extreme hd with custom presser plate that was 2010 in Adelaide think i...
by zoomzoom
Tue Apr 09, 2013 6:18 pm
Forum: General Tech & Modifications
Topic: wheel bearings
Replies: 5
Views: 2597

yeap and get them to do anything else while there at it





zoomzoom
by zoomzoom
Mon Apr 08, 2013 7:30 pm
Forum: General Tech & Modifications
Topic: wheel bearings
Replies: 5
Views: 2597

they are and do yourself a favour look on ebay for a manual,only about $20 even the n/a one will get you out of trouble for most thing



zoomzoom
by zoomzoom
Sun Feb 24, 2013 10:52 am
Forum: General Tech & Modifications
Topic: fun times with timing belts and cam shafts
Replies: 9
Views: 5117

turn the crank back to 17c btbc, if I read it right you're got the pully mark on 0,if so the pistons are hitting the valves



zoomzoom
by zoomzoom
Sat Feb 16, 2013 1:17 pm
Forum: Members Rides & Introductions
Topic: Ugly duckling Turbo Prairie
Replies: 203
Views: 160921

you've done a bloody good job of it mate,





zoomzoom