N12 Turbo Forums

I've got the id725s and they've been great idles nice and happily.
Though the PITA of making the retainers would put me off it.

Dexi, don't suppose you have some factory skirts?

Is this with slicks?

Get a friend
Remove starter
Big screw driver against one of the flywheel teeth wedged against the casing
Crank it up with a torque wrench while the mate holds the screw driver in place

Which track day are you thinking of?

Don't worry the lip is part of the outer casing of the bush.. cut it out..

Cheers,

Dan

Thanks guys,

The outer bush was knackerred on that side. So I've got a nolathane set.
Questions:
Is the lip on the arm part of the arm or the old bush? Looks to be the bush but the nolathane doesn't have the lip...

Don't suppose there is an easy way to get the bushes out?

Cheers,

Dan

G'day mate,

Is your battery fully charged up? All the cranking can suck a battery if it's not 100% juiced and ready to go.
Does it crank now if you disconect the relays etc?

Cheers,

Dan

Hi all, Another of the tasks that I've never quite got to is to sort out the alignment on the ET. I had it checked when I last got new tires on it, the drivers side rear at the front was pointing about 5 degrees out. Is there a way to correct it? As far as I'm aware the car hasn't had a shove in thi...

Can say with some experience now that whilst it's nice to have the big numbers on paper and when it all happens you can't wipe the grin off your face, if I did it again I'd be looking to use the stock manifold and a medium sized turbo (T25ish) and push it close to it's limit for a car that probably ...

Geez Mike, we could nearly do a cruise

The video I whipped up of our trip to powercruise....

http://www.youtube.com/watch?v=Hm7SGeLE4cU

Hi guys, grabbed some new rims to try and put down the power. A massive improvement over the stock bickies and looking a bit better too.. Went to powercruise over the weeked and will pop up a quick vid in due course. Cheers, Dan http://carphotos4.cardomain.com/images/0016/24/45/16024254_large.jpg ht...

I thought Pulsar Parts had closed down some time ago..??

SimonN10 - picture below of engine bay with water cooler.
Big reservoir in the boot too.