N12 Turbo Forums

Hey guys just going to race my datto and I want to use a e13 motor. A few questions. E series strength, are they all as strong as each other? Are the cranks the same strength/design? Any tips?

Hey guys just working on a project and I want to n/a a e15 motor. Im guessing the strongest motor is the e15et? I have to use a e15 block and I was thinking could I use a combination maybe getting a e16 crank and getting e15et forged pistons milled down? Just wondering if anybody knows a good combin...

hey guys can u make theese n12's 4x4 at all. i saw trhere was a 4x4 gearbox for sale ages ago

hey guys my exa starts and runs but when it gets to running temp it stalls and wont start. it doesnt overheat and stalls about a few minutes after starting everytime. any ideas. thanx

hey guys just picked up an 83 exa. it has a rebuilt motor running a t25 and intercooler. first step is to boost it but whats safe boost for theese motors? also i will keep an eye out for a jap spec inlet manifold and im guessing to go VL throttle body? i read the upgrades for brakes and that seems e...

goto www.datsun1200.com and search e15 or e15et

well i want to boost it up anyway lol
yea u can make a A12 into a 13-1400cc.

hey guys just wondering if the whole efi and turbo setup of a n12 turbo (e15et) will be too rich on a stock A12 motor? the e series dizzy can fit the A series or in theory it can run but is it 2 much? thanx

hey guys i want to start looking at adapting ford EDIS to my E15. has anybody done it or help? i need to find out what car i can take it from and what parts i need :/ cheers

well i think i have to go aftermarket :(. i wanted drivability and easy to get parts hence why i wanted stock parts. i think if i can sell my 3 ecu's, 3 AFM's and 2 wiring looms that should help with buying a aftermarket ecu. i would appreciate if people could help me with buying a 2nd hand aftermar...

also thinking. could i get a L series dizzy/oil pump shaft cut it, get it reverse threaded and also get the hole at the front of the cam threaded, screw the shaft into the front of the cam and make a bracket to hold my dizzy straight and in place? any1 get my drift? sounds pretty funky but i dont th...

if i were to connect the dizzy to the cam sprocket which would make it run backwards couldnt i just change my firing order? or firing order and flip that wheel inside the dizzy?

looked at bringing the motor forward but some steering will be in the way so thats a no go. im looking at doing somthing funky (i hope not dodgy) im looking at using the crang angle sensor in the dizzy on the front of the cam but i still need to get the ignition. can i use coilpacks?

had a bit of a brake through (i hope) i was measuring things up and ive got atleast 100mm to bring the motor forward b4 the pulley hits the radiator. so can i get a stock front pulley with only 2 pulleys not 3? if so it will give me enough room to bring it forward and then ill get a new tailshaft ma...

hey guys I have a e15et in my datto1000 ute. I hate the fact that the dizzy pokes through the firewall so im trying to overcome it. I was hoping I could angle the dizzy 90 degrees some how. does anybody have any ideas? I want to use the original ecu still. this is a good conversion only if I could o...