N12Turbo.com lanyards are now available! Click here to visit the shop
Search found 64 matches
- Sat Jan 24, 2009 2:53 am
- Forum: General Tech & Modifications
- Topic: car just died while driving
- Replies: 6
- Views: 2457
re:car just died while driving
Hi I you say it will be the fuseable link in the wiring loom that runs from the positive battery to the main engine loom. Its the loom that is about 150mm long and a wiring plug with 4 wires going into it you will see the fuseable link its the odd looking wire that's broken. Here is a picture of the...
- Sun Dec 21, 2008 7:24 am
- Forum: General Tech & Modifications
- Topic: E16 mod
- Replies: 34
- Views: 9423
Re: e 16
Thanks it is a nice one but it is not mine it was at the workshop that do all the custom parts including the pistons also dyno tuning.
chezza wrote:I like your engine mate, i want 1 lol
- Sat Dec 20, 2008 8:59 pm
- Forum: General Tech & Modifications
- Topic: E16 mod
- Replies: 34
- Views: 9423
Re: e 16
They can be made to any oversize you require but i would suggest to go a lower oversize that you need to get the bores straight.That way you still have bore thickness so there is less chance of heat distortion. You need to use a 1.6 crank with the turbo rods you have. I will have to get back to you ...
- Sat Dec 20, 2008 2:17 pm
- Forum: General Tech & Modifications
- Topic: E16 mod
- Replies: 34
- Views: 9423
Re: e16
Hi If you are serious about the stroker option I can organize custom forge pistons to suit using your same rods so it will be a straight forward assembly. http://i42.photobucket.com/albums/e345/jimmyet46/ETStrokerpistons.jpg http://i42.photobucket.com/albums/e345/jimmyet46/E16stroker5.jpg http://i42...
- Wed Jun 18, 2008 12:41 pm
- Forum: General Tech & Modifications
- Topic: plenum
- Replies: 39
- Views: 11906
intake
Here is a pic of the Racetec one http://i42.photobucket.com/albums/e345/jimmyet46/ETStrocker-2.jpg You have to look at the swept volume on the motor, I think it’s the capacity of the motor times 2.7 or some thing like that I think out plenum volume is ment to be around the 3.7-4l in capacity, runner...
- Mon May 05, 2008 1:09 pm
- Forum: General Tech & Modifications
- Topic: E15, E15ET, E16 flywheels the same?
- Replies: 6
- Views: 2612
Hi the ringear's are the same turbo non turbo even auto's.Just be sure you but it on the right way as one side has a lead in on the edge so the starter gear can mesh into. Thanks Jimmy when i went into nissan to get a ringear for my et i asked then and the na engines had a diffrent part number compa...
- Thu Mar 20, 2008 10:18 am
- Forum: General Tech & Modifications
- Topic: forged pistons ? and conrods
- Replies: 4
- Views: 1585
Re: forged pistons ? and conrods
If you are after a set of custom forge pistons Racetec have all the dimentions and a supplier.If you want there number give a msg. PS: Just depends on what you want the engine to do if you require forge pistons Thanks Jimmy hi just wondering what pistons you guys use or recomend ? i had a quick flic...
- Wed Feb 27, 2008 10:36 pm
- Forum: General Tech & Modifications
- Topic: Stainless vs. Mild
- Replies: 30
- Views: 6071
- Mon Feb 11, 2008 9:38 pm
- Forum: General Tech & Modifications
- Topic: Cracked Block... NOOO!
- Replies: 22
- Views: 6059
block,crank and rods
pm sent
Thanks
Jimmy
Thanks
Jimmy
WoL-E wrote:hey jimmy cheers for that.. how much would u want for ur block, crank n rods.... im in rowville vic if thats close to u???
- Fri Feb 08, 2008 1:15 am
- Forum: General Tech & Modifications
- Topic: Cracked Block... NOOO!
- Replies: 22
- Views: 6059
Re: Cracked Block... NOOO!
Hi there I would put it back together get it running use the Silver Seal Head & Block Seal this should get you going as a temporary fix.I would get another block and rebuild a fresh engine to put in. Silver Seal® Head & Block Seal Silver Seal® Head & Block Seal repairs cracks in cast iro...
- Sun Jan 20, 2008 11:18 am
- Forum: General Tech & Modifications
- Topic: BANG vs. BUCK
- Replies: 13
- Views: 4222
fuel
Hi all Just use Shell V Power Racing 100 octane fuel with 5% ethanol but don't get confussed with the V Power that is 98 both are available at the pump but the racing is only at certain shell servo's check out the website. http://www.shell.com/home/Framework?siteId=au-en&FC2=/au-en/html/iwgen/le...
- Sat Nov 10, 2007 10:13 pm
- Forum: General Tech & Modifications
- Topic: gearbox
- Replies: 6
- Views: 2385
Re: gearbox
I have two blown et gearbox's you might get some spares out them some gears the housing's are throw away. I also have a great non turbo box with starter and flywheel just in case i need to keep the et going while i chased up a turbo box. thanks Jimmy ok i have just blown me gearbox into pieces and i...
- Sat Aug 25, 2007 1:06 am
- Forum: General Tech & Modifications
- Topic: need more powerful fuel pump any ideas?
- Replies: 17
- Views: 6115
Re: need more powerful fuel pump any ideas?
Use a VL Turbo pump that should give you plenty Thanks Jimmy Hey guys my standed fuel lift pump does not flow enough fuel for my new setup, i'v heard you can use a BA falcon fuel pump, but i'm not sure if it a simple swap or if there are mods involved, does any one know anything about this? or atlea...
- Wed Jul 18, 2007 12:46 am
- Forum: General Tech & Modifications
- Topic: subject: desire
- Replies: 17
- Views: 5875
Re: subject: desire
Try this link on this site http://forum.n12turbo.com/viewtopic.php?t=1661 Thanks Jimmy http://www.mrdperformance.biz/Projects/10sec%20MRD%20ET/MRDET/images/STRUTS.jpg http://www.mrdperformance.biz/Projects/10sec%20MRD%20ET/MRDET/images/STRUTS1.jpg damn near wet myself when i saw these :P look very m...
- Tue Jul 03, 2007 3:15 am
- Forum: Trader Rating (Private Sellers)
- Topic: Jimmy46
- Replies: 7
- Views: 3456