N12 Turbo Forums

Hi I you say it will be the fuseable link in the wiring loom that runs from the positive battery to the main engine loom. Its the loom that is about 150mm long and a wiring plug with 4 wires going into it you will see the fuseable link its the odd looking wire that's broken. Here is a picture of the...

Thanks it is a nice one but it is not mine it was at the workshop that do all the custom parts including the pistons also dyno tuning.

chezza wrote:I like your engine mate, i want 1 lol

They can be made to any oversize you require but i would suggest to go a lower oversize that you need to get the bores straight.That way you still have bore thickness so there is less chance of heat distortion. You need to use a 1.6 crank with the turbo rods you have. I will have to get back to you ...

Hi If you are serious about the stroker option I can organize custom forge pistons to suit using your same rods so it will be a straight forward assembly. http://i42.photobucket.com/albums/e345/jimmyet46/ETStrokerpistons.jpg http://i42.photobucket.com/albums/e345/jimmyet46/E16stroker5.jpg http://i42...

Here is a pic of the Racetec one http://i42.photobucket.com/albums/e345/jimmyet46/ETStrocker-2.jpg You have to look at the swept volume on the motor, I think it’s the capacity of the motor times 2.7 or some thing like that I think out plenum volume is ment to be around the 3.7-4l in capacity, runner...

Hi the ringear's are the same turbo non turbo even auto's.Just be sure you but it on the right way as one side has a lead in on the edge so the starter gear can mesh into. Thanks Jimmy when i went into nissan to get a ringear for my et i asked then and the na engines had a diffrent part number compa...

If you are after a set of custom forge pistons Racetec have all the dimentions and a supplier.If you want there number give a msg. PS: Just depends on what you want the engine to do if you require forge pistons Thanks Jimmy hi just wondering what pistons you guys use or recomend ? i had a quick flic...

S/S will crack in time against mild steel this also depends on the wall thickness of the tube you use.

Thanks
jimmy

pm sent


Thanks
Jimmy

WoL-E wrote:hey jimmy cheers for that.. how much would u want for ur block, crank n rods.... im in rowville vic if thats close to u???

Hi there I would put it back together get it running use the Silver Seal Head & Block Seal this should get you going as a temporary fix.I would get another block and rebuild a fresh engine to put in. Silver Seal® Head & Block Seal Silver Seal® Head & Block Seal repairs cracks in cast iro...

Hi all Just use Shell V Power Racing 100 octane fuel with 5% ethanol but don't get confussed with the V Power that is 98 both are available at the pump but the racing is only at certain shell servo's check out the website. http://www.shell.com/home/Framework?siteId=au-en&FC2=/au-en/html/iwgen/le...

I have two blown et gearbox's you might get some spares out them some gears the housing's are throw away. I also have a great non turbo box with starter and flywheel just in case i need to keep the et going while i chased up a turbo box. thanks Jimmy ok i have just blown me gearbox into pieces and i...

Use a VL Turbo pump that should give you plenty Thanks Jimmy Hey guys my standed fuel lift pump does not flow enough fuel for my new setup, i'v heard you can use a BA falcon fuel pump, but i'm not sure if it a simple swap or if there are mods involved, does any one know anything about this? or atlea...

Try this link on this site http://forum.n12turbo.com/viewtopic.php?t=1661 Thanks Jimmy http://www.mrdperformance.biz/Projects/10sec%20MRD%20ET/MRDET/images/STRUTS.jpg http://www.mrdperformance.biz/Projects/10sec%20MRD%20ET/MRDET/images/STRUTS1.jpg damn near wet myself when i saw these :P look very m...

You are Welcome

et.turbo.dude wrote:Recommended Trader


thanks for the help mate!